Tag Archives: retrochallenge

Osborne Restoration part 14: USB floppy emulator – a semi-permanent solution

In my last post I had successfully got a Gotek/FlashFloppy USB floppy emulator working with my Osborne computer.

For future use, I still wanted to design a way to copy any additional files as and when I needed. I’d already experimented with RS232 serial transfers. I had also wondered about leaving a floppy cable installed somewhere in the machine so I could attach a USB floppy emulator easily when I needed to, but it was in no way obvious how to do that without leaving the aesthetics of the machine a bit ‘messy’.

Today’s job was to solve that dilemma.

read more

Osborne Restoration part 13: USB floppy emulator – Gotek/FlashFloppy

In my last post, I had tried to get my Gotek/HxC USB floppy emulator working reliably with my Osborne computer.

For some reason the drive select signals from the Osborne weren’t getting through correctly to the Gotek/HxC.

This meant I couldn’t use a physical drive at the same time as the emulator (for example to copy files between real and virtual disks) as the computer couldn’t select between the drives.

Today it was time for a different approach.

read more

Osborne Restoration part 12: USB floppy emulator – Gotek/HxC

My next stage with my Osborne computer was to bulk transfer CPM software I’ve downloaded from the internet onto the computer.

In last year’s Retro Challenge I made my RetroMatic 2000, which included a USB floppy drive emulator based on Gotek hardware with HxC firmware.

I’d already tested that this worked with the Osborne with a custom cable, so my plan was to open up the Osborne, connect the cable, copy all the software to real floppy disks, then reassemble the computer.

Little did I know that this simple job would turn into a 3+ day marathon…

read more

Osborne Restoration part 11: floppy controller debugging

The story so far: I’ve bought two Osborne 1 portable computers (circa 1982) and am trying to get both working.

The first one (henceforth known as the “bad” one) had no boot disks, but would power on to a boot screen. I couldn’t get it to boot from a USB floppy emulator with an appropriate disk image, and when I subsequently obtained genuine boot disks it wouldn’t boot from them either.

The second one (henceforth known as the “good” one) was in much better condition, came with boot disks, and was generally working. I’ve restored it (re-capped the PSU, cleaned the drives, fixed a broken key) and will be trying to get more software running on it.

But I really want to get the “bad” one working again. I hate to see historic technology in that state, and if it’s restored to a working state I can pass it on to another collector. In a non-working state it would be destined for the parts bin :-(

read more

Osborne Restoration part 8: transferring files with an RS232 interface lead

Having got one of my Osbornes working correctly, the next challenge is to get software installed on it. I now have the originally-supplied set of disks containing business software, but as it is a CPM machine, there are countless other programs available (and archived online).

So let’s see what my options are for copying the software to my Osborne…

read more